- This topic has 7 replies, 2 voices, and was last updated 11 years, 6 months ago by
.
-
Posts
-
Good morning all,I was looking for some advice on this Bosch 10kg vented tumble drier,giving error code e01 after 10 mins of operation..intermittently…..cleaned all filters and checked airflow,,,,bosch themselves gave a guess of possibly the motor at fault…not turning fast enough??stripped it down to check ducting clear….all ok….any advice gratefully received…thanks in advance…
Re: Bosch wtb76556gb/05 e01 error code
Is the machine located in a confined space? These machines need lots of airflow and that usually means being located in a large room or opened door or window close by. If you switch it off then immediately back on, what happens?
Re: Bosch wtb76556gb/05 e01 error code
Hi martin…if switched back on…error code displays and won’t run…is located in a generous room…if left for 30 mins or so ..it will run again…for 10-20 mins then error code reappears…I have ordered up exhaust ntc…and motor as per bosch tech advice…have capacitor also…
Re: Bosch wtb76556gb/05 e01 error code
thedoood wrote:I have ordered up exhaust ntc…and motor as per bosch tech advice…have capacitor also…
Not at all sure about the motor advice from BSH, that’s an odd one, costly too if it isn’t that. The NTC is a good shout though.
The vent? How is it vented? Not a long exhaust outlet I trust?
Re: Bosch wtb76556gb/05 e01 error code
,,it is a flexi hose used…but it isn’t long….well it isn’t extended out…
Re: Bosch wtb76556gb/05 e01 error code
You said previously that the airflow was clear so I take it the vent arrangement outside is in order too right?
- You must be logged in to reply to this topic.