Bosch dishwasher problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch dishwasher problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 5, 2014 at 5:30 pm #82490
    Bungee69
    Participant

    My bosch classixx sgs43c12gb/15 has not been washing properly, water not heating & cycle running for ages and leaving residue When I’ve investigated, the pcb has a scorch mark on the board behind one of the coils. Could this be the problem. I’m not sure how i could check the heater as it looks from schematics as if it is integrated under the dishwasher. Pcb £30, but dishwasher must be about 10yr old i reckon. Ive gone through other posts to see if its been dealt with but im at a loss. If there is a suitable thread with a fix a link for that will be welcome.

    Thanks in advance

    October 5, 2014 at 5:33 pm #420059
    Martin
    Participant

    Re: Bosch dishwasher problem

    A simple clean up of the relay pin and the burned area of the solder track. Then a nice blob of solder will fix it good as new.

    October 9, 2014 at 11:39 am #420060
    Bungee69
    Participant

    Re: Bosch dishwasher problem

    Thanks very much Martin, that was just the job.Worked straight away.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.