Schreiber/Hygena Built-in Fridge Thermostat Access

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Schreiber/Hygena Built-in Fridge Thermostat Access

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 6, 2014 at 12:41 pm #82504
    simondatws
    Participant

    Can I access the thermostat on my Schreiber/Hygena Built-in Fridge without dismantling the installation?
    Please help.

    October 6, 2014 at 12:53 pm #420076
    SAMURI
    Participant

    Re: Schreiber/Hygena Built-in Fridge Thermostat Access

    Do you know the model number.

    On most Hygena / diplomat under worktop fridges you need to pull the fridge out to gain access to the thermostat if the control is at the top.

    Bob

    October 7, 2014 at 6:23 am #420077
    simondatws
    Participant

    Re: Schreiber/Hygena Built-in Fridge Thermostat Access

    Hi Bob, It is APM 6325.
    The thermostat control knob it at the top.
    I thought there might be access by taking the light out but it doesn’t seem big enough.

    October 7, 2014 at 7:02 am #420078
    SAMURI
    Participant

    Re: Schreiber/Hygena Built-in Fridge Thermostat Access

    No you have to pull the fridge out to gain access to the thermostat.

    It is in a small box on the top behind the control knob.

    You do not have to pull the fridge fully out but you need to pull it forward about 6 inches

    Bob

    October 7, 2014 at 10:23 am #420079
    simondatws
    Participant

    Re: Schreiber/Hygena Built-in Fridge Thermostat Access

    Thanks for the help Bob, I will let you know how I get on. Unfortunately the fridge is locked in by the cupboard its in, the work surface above and kick board which is also fixed by being tiled up-to after the fridge and cupboards were fitted.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.