Stoves Richmond 900E Hob flashing E4

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Stoves Richmond 900E Hob flashing E4

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 9, 2014 at 7:41 am #82538
    oscar123
    Participant

    I have a customer complaining he has a Stoves Richmond 900E 444447093 range cooker with induction hobs that flashes E4.. anyone any Ideas as to the fault code?
    Regards Oscar

    October 10, 2014 at 8:53 am #420184
    Seamy
    Participant

    Re: Stoves Richmond 900E Hob flashing E4

    Likely a poor connection between user interface control & induction board.
    Small jumper cable loose or poor connection.
    Or faulty p.c.bs

    October 16, 2014 at 5:10 pm #420185
    oscar123
    Participant

    Re: Stoves Richmond 900E Hob flashing E4

    Thanks for your reply Seamy 🙂 must upgrade my email as I only just received it! Spoke to customer and its not one I want to get involved with.. Apparently he has had a guy round changing boards and as Stoves involved. If they can’t fix 🙂
    Oscar

    October 17, 2014 at 10:57 pm #420186
    SL
    Participant

    Re: Stoves Richmond 900E Hob flashing E4

    This code means no communication between the induction power board and the interface. It is actually caused by a loose link on the mains terminal block. We have had a few of these do this. The code sends you looking everywhere except the right place.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.