Amica AWCT10L

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Amica AWCT10L

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 14, 2014 at 1:58 pm #82608
    scorpy1971
    Participant

    Hi All, I’m hoping some one can offer some guidance.
    A friend has an Amica AWCT10L washing machine, and I have given it a good look over and can see no obvious problems, however when in use, it will fill and start to spin then offers up an error code. All lights are lit with the exception of the power light. As far as I can tell it “should” be either a motor fault or a PCB fault. As the motor spins in both directions with no obvious noise or strain, I am more inclined to suspect the PCB. Can any one offer any more info on how I can determine if that is indeed the culprit?
    Thanks in advance.

    Dave.

    October 15, 2014 at 7:43 am #420403
    Seamy
    Participant

    Re: Amica AWCT10L

    Have only had to change P.C.Bs on these, but in saying that i’ve not done many, hopefully someone with more experience of them will post.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.