internal wiring position TVAM 70

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › internal wiring position TVAM 70

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 17, 2014 at 11:58 am #82654
    aidepol
    Participant

    hotpoint aquarius tvam 70 tumble dryer.
    replaced front & rear drum bearings. made a diagram of which terminals the wires went to on the start button, heat switch, timer control & door lock. While waiting for the bearings to arrive the wife has inadvertently thrown the diagram away.
    The wire colours that are for the timer, start & hi/lo heat are White/pink, grey, double blue wire, single blue, red, orange, white, black & a black with a shroud round the female spade connector.
    The door interlock wires are white/pink, brown & a grey, they are separate wires & not in a connector block.

    The timer control has the spade connectors numbered 1,2,8,3, no number. 5 & 10.
    door interlock connectors numbered 3,4 & 5.
    need to know which wires go where please.

    October 17, 2014 at 1:34 pm #420508
    iadom
    Moderator

    Re: internal wiring position TVAM 70

    Rule 8 applies.

    PS. Although it won’t make you feel any better I will add that there was no need to touch any of the wiring connections to effect this repair. 🙁

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.