Indesit DIF16UK

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit DIF16UK

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 17, 2014 at 2:53 pm #82659
    polo1
    Participant

    Hi,
    wonder if anyone can help. At the end of a full cycle (heavily soiled), the drain pump keeps running and the led on the “heavily soiled” sequence button is flashing. They only stop when power is removed and start again when power is restored.
    Can anyone advise on the likely source of and solution to this problem?
    Thanks in advance.

    October 17, 2014 at 3:01 pm #420516
    iadom
    Moderator

    Re: Indesit DIF16UK

    Counting from the left can you give us the flashing button by number, is it the 1st, 2nd etc.
    Or look HERE 😉

    The first four lights are used for error codes on yours.

    October 17, 2014 at 3:06 pm #420517
    polo1
    Participant

    Re: Indesit DIF16UK

    Sorry, first option button from the left. Sequence is power button, “P” button, two leds (one above the other) then the button which has the flashing led (saucepan partially filled picture).
    Thanks

    October 17, 2014 at 3:32 pm #420518
    iadom
    Moderator

    Re: Indesit DIF16UK

    You have a flooded base. You need to pull out the dishwasher and tilt it to one side . Place some towels on the floor to catch any water.

    It could be over soaping or you may have an internal leak that needs fixing.


    Sent from my iPad using Tapatalk HD

    October 17, 2014 at 3:40 pm #420519
    polo1
    Participant

    Re: Indesit DIF16UK

    Many thanks for the quick response – appreciated… I’ll give this a try.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.