ISE W1607W ADO error code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ISE W1607W ADO error code

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • October 18, 2014 at 12:03 pm #82673
    neilbow
    Participant

    Hi folks,
    Sorry to post a technical enquiry for an ISE machine here but for some unknown reason I do not have access to that forum. Right on of my engineers has come across this machine it had finished it’s last cycle and the clothes were trapped inside as the door would not open. He released the door with the release cable. Now all we get in the display is “aDo” can anyone point us in the right direction Many Thanks Neil

    October 18, 2014 at 6:55 pm #420558
    Martin
    Participant

    Re: ISE W1607W ADO error code

    I’m guessing you didn’t check the ISE web site for the possible answers?

    October 18, 2014 at 7:37 pm #420559
    kwatt
    Keymaster

    Re: ISE W1607W ADO error code

    Looks like the customer’s been playing with the buttons Neil. 😉

    K.

    October 19, 2014 at 6:52 am #420560
    neilbow
    Participant

    Re: ISE W1607W ADO error code

    Hi Martin. OOOPs sorry I did not know there was a ISE website, I have now looked it up and found that info thanks, I just jumped into the ISE forum and found I do not have access ??? can somebody invite/arrange for me to have access so I have all the relevant info. Once again thanks for the information. Regards Neil

    October 19, 2014 at 7:36 am #420561
    kwatt
    Keymaster

    Re: ISE W1607W ADO error code

    Access sorted.

    K.

    November 11, 2014 at 5:41 pm #420562
    neilbow
    Participant

    Re: ISE W1607W ADO error code

    Just an update on this one, We have tried as suggested but still cannot clear ado from display,looks like a bit more than finger trouble Regards Neil

    November 12, 2014 at 7:51 am #420563
    Martin
    Participant

    Re: ISE W1607W ADO error code

    neilbow wrote:Just an update on this one, We have tried as suggested but still cannot clear ado from display,looks like a bit more than finger trouble

    Oh dear! I’m not sure who fixes ISE machines that can help you further but hopefully a call to ISE HQ might be the way forward. Is it not covered by some sort of warranty?

    November 12, 2014 at 1:38 pm #420564
    neilbow
    Participant

    Re: ISE W1607W ADO error code

    We are supposed to be the ISE repairer’s for North London ??? Yes we are supposed to be repairing it under the warranty OOOOps Neil

    November 12, 2014 at 2:18 pm #420565
    kwatt
    Keymaster

    Re: ISE W1607W ADO error code

    Door lock?

    But have you reset the machine?

    K.

    November 13, 2014 at 8:26 am #420566
    neilbow
    Participant

    Re: ISE W1607W ADO error code

    appliance will not reset. pressing the super rinse button has no affect and pressing the door opening button also has no affect.

    Neil

    November 13, 2014 at 8:43 am #420567
    kwatt
    Keymaster

    Re: ISE W1607W ADO error code

    Back to door lock then. After that the PCB.

    K.

    November 13, 2014 at 4:35 pm #420568
    neilbow
    Participant

    Re: ISE W1607W ADO error code

    My thoughts are it is probably Main PCB.
    Neil

    November 13, 2014 at 6:13 pm #420569
    Martin114
    Participant

    Re: ISE W1607W ADO error code

    The inverter board can cause symptoms that you would instinctively associate with the control board.
    That would be my guess if the lock is ok.


    Sent from my iPad using Tapatalk HD

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.