- This topic has 3 replies, 2 voices, and was last updated 11 years, 5 months ago by
.
-
Posts
-
Hi can anyone tell me E30 fault on an Zanussi ZWG1120Pwashing machine. Have replaced a pressure switch but still no joy. Inlet solenoids check out both eclectically and mechanically, but don’t engage in the cycle to let water in. Thanks
Re: Re:Zanussi ZWG1120P
E30 on a ZWG1120P refers to pressure system fault, E30 on a ZWG1120M refers to door lock fault.
Re: Re:Zanussi ZWG1120P
Hi Seamy
thanks for the reply, I have replaced the pressure switch, door lock is
operating perfectly. Just to clarify it is 1120P. When I switch it on the door lock locks, after may be 20seconds the e30 fault shows but the
inlet solenoids don’t come in and fill the machine. I have tested solenoids electrically and mechanically, they work perfectly.has me stumped as Ive checked everything and cannot find a problem. Any further advice or insight would be appreciated.
- You must be logged in to reply to this topic.