wf430 shutting down

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wf430 shutting down

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 10, 2014 at 7:06 pm #82976
    clockworkone
    Participant

    Had a quick look at this one this evening.It spins for a while on spin cycle and then it shuts down completely.No lights whatsoever.It will turn on 5 mins later and do same again.It strikes me that it is a bad connection.I pinched edge connectors on board.I have not removed board yet.Had a look at control pcb and checked micro switches.Would a faulty interlock shut down whole machine.Paul

    November 10, 2014 at 7:23 pm #421321
    Dansta
    Participant

    Re: wf430 shutting down

    Does it only play up on the spin cycle?

    November 10, 2014 at 8:53 pm #421322
    clockworkone
    Participant

    Re: wf430 shutting down

    yes

    November 11, 2014 at 8:04 am #421323
    Martin
    Participant

    Re: wf430 shutting down

    Moulded plug/mains lead/filter? Vibration during spin = break somewhere in harness?

    November 11, 2014 at 8:34 pm #421324
    clockworkone
    Participant

    Re: wf430 shutting down

    Thank you for replies. checked all above suggestions as thoroughly as i can.After machine shuts down there is still power to board.Removed board.Nothing obvious on it.Left it into guy who does board repairs for me so will see what he says.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.