Zanussi DE6854 lights flashing

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Zanussi DE6854 lights flashing

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #8299
    admin
    Keymaster

    Just mended the washing machine, now the dishwasher’s packed up ! It is a Zanussi DE6854. After turning on & selecting a cycle it pumps out as normal but then stops before filling, with the ‘drying’ & ‘power’ lights flashing. The water supply is ok. Any suggestions please ? Thanks.

    #127893
    Penguin45
    Participant

    Hi Alexis,
    I take “lucky” isn’t your middle name then? The fault you are describing is not draining out in the specified time. This may be caused by the machine not draining, it may also THINK it hasn’t emptied, despite the water having gone. This will be a blockage in the water level control sysytem, or the associated tubes under the machine.

    Pull the plug before going in………

    Regards,
    Penguin45.

    #127894
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Thanks, here goes…

    #127895
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Thanks again Penguin, now working ok despite only finding a very small amount of crud in the pipes.
    One question I have, what is all the brown stuff that looks like silica gel in the the tank on the side ?
    Regards
    Alexis

    #127896
    Penguin45
    Participant

    Re: Zanussi DE6854 lights flashing

    It’s the water softener regeneration unit.

    Glad problem solved,

    Regards,
    Penguin45.

    #127897
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    I spoke too soon !
    It worked ok for a couple of days but has now packed up again, this time I have both the drying & washing indicator lights flashing.
    Am I flogging a dead horse ?

    PS I like the Dave Allen quote – may he RIP.

    #127898
    Dave_Conway
    Participant

    Re: Zanussi DE6854 lights flashing

    There’s quite a few versions of this model, to help further, please check around the door for the PNC beginning 911????? and could you let us know how the lights are displayed on the control panel, either 6 in a row, left to right or 2 banks of 3.

    Dave.

    #127899
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Dave, the lights are laid out with the program selection buttons in one row left to right and the cycle status lights vertically next to them. Will post the PNC later.
    Thanks.

    #127900
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Labelled as follows:
    PNC 911888074
    Type 911N81-8F

    #127901
    johnboy
    Participant

    If the wash and drying phase lights are flashing on this model then the following has or may have occured
    a) Leakage from the various connections
    b) Floating sensor blocked mechanically
    c) Float microswitch faulty

    #127902
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Thanks, can you give me some guidance where to find the sensor & switch ?
    Regards
    Alexis

    #127903
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Have now found the fault, it is the water softener regen unit leaking.
    It is marked as follows:
    Bitron Tipo 428
    152.462.40 152.462.41
    152.462.42 152.462.43.
    Any idea where I can get one ?
    Thanks.

    #127904
    Dave_Conway
    Participant

    Re: Zanussi DE6854 lights flashing

    Do you mean the large chamber on the left hand side of the appliance ?

    Sorry, the numbers stamped on it won’t mean a thing I’m afraid, they’re generally just moulding numbers etc.

    If it is, that’s the IWMS unit which comes as a kit with the inlet valve and various outher bits, quite a common compliant with these dishwashers.

    It’s £65 inc VAT and delivery, if we’re on the same lines, please email me at spares@ukwhitegoods.co.uk and I’ll arrange for you.

    Dave.

    #127905
    admin
    Keymaster

    Re: Zanussi DE6854 lights flashing

    Dave, it’s a piece that is fitted on the left when looking from the front, just under the outer cover. It is the full height of the machine and has lots of internal passages, including a connection to the drying vent. Let me know if that’s the part you mean please ?
    Thanks

    #127906
    Dave_Conway
    Participant

    Re: Zanussi DE6854 lights flashing

    Yep, that’s the one 🙂

    Dave.

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.