Indesit Wil123s – light 2 flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit Wil123s – light 2 flashing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 16, 2014 at 7:35 pm #83043
    gazman
    Participant

    Can any tell me what the 2nd flashing light means?

    The washing machine starts. But after 20 seconds in the power light started flashing fast and light 2 (stain remover) starts flashing green. The machine is still making a noise but doesn’t do the wash.

    I checked the filter at the bottom at the front but apart from a 5pence coin it was clear. I checked the back sump underneath but it felt clear.

    Any help to what this flashing light means?

    November 16, 2014 at 9:21 pm #421540
    iadom
    Moderator

    Re: Indesit Wil123s – light 2 flashing

    The same as THESE

    November 16, 2014 at 11:30 pm #421541
    gazman
    Participant

    Re: Indesit Wil123s – light 2 flashing

    thanks for that.

    So it means pressure switch stuck on empty. This makes sense then as on the 1st wash today when it showed the error the only some of the clothes were damp and the rest dry. Emptied the clothes out and tried on empty and doesn’t seem to fill at all now before showing the error.

    Our heating tank has a leak somewhere and meaning i need to open the water switch and refill the tank every few weeks.

    I checked the tank pressure after the fault today and it was empty and needed filled up again.

    So I take it i’d need to get someone in to look at it and there isn’t anything a noob could fix?

    November 17, 2014 at 9:09 am #421542
    iadom
    Moderator

    Re: Indesit Wil123s – light 2 flashing

    Nothing obvious, could be a partial blockage in pressure switch hose or pressure chamber, faulty pressure switch, faulty main pcb etc, etc.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.