Diplomat oven not working

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Diplomat oven not working

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • November 17, 2014 at 7:29 pm #83059
    Bas400
    Participant

    I’m having a problem with my diplomat 620 oven I have renewed the element and the selector switch. But still not working could it be the thermostat.

    November 17, 2014 at 7:44 pm #421588
    SAMURI
    Participant

    Re: Diplomat oven not working

    I would need the model number to advise normaly starts with an A and 2 other letters then 4 numbers.

    If your model has an electronic timer you need to have a time set on the clock for the oven to work.

    Check to see if you have a time set any time will do it does not have to be the correct time.

    Bob

    November 17, 2014 at 8:03 pm #421589
    Bas400
    Participant

    Re: Diplomat oven not working

    Hi
    Not sure of model number looked inside the door but nothing there. On the front it says SELECT 620 by DIPLOMAT. The clock is set to correct time as well

    Thanks
    Brian

    November 17, 2014 at 8:42 pm #421590
    Bas400
    Participant

    Re: Diplomat oven not working

    Hi Bob

    I have found the Model number on the back of the oven AHY3620
    Thanks

    November 17, 2014 at 9:11 pm #421591
    adv
    Participant

    Re: Diplomat oven not working

    what was wrong with oven in first place ? was it just dead or not heating ?

    November 17, 2014 at 9:20 pm #421592
    SAMURI
    Participant

    Re: Diplomat oven not working

    It will most likely be the oven safety cut out stat at the back of the oven.

    It is like a small round button size stat with 2 wires going to it.

    Check to see if it is open circuit if it is you will need to replace it.

    For test purposes only you can join the 2 wires together to see if the oven works.

    If it does then fit a new stat. Do not use the oven with the wires together as it is a safety device to prevent overheating.

    Bob

    November 17, 2014 at 10:43 pm #421593
    Bas400
    Participant

    Re: Diplomat oven not working

    Hi Bob
    I’ve tried joining the wires together but still nothing

    November 18, 2014 at 8:00 am #421594
    SAMURI
    Participant

    Re: Diplomat oven not working

    Try joining the 2 wires to the main thermostat to bypass the main thermostat.

    Did you check the round button size stat for continuity at the same time


    Bob

    November 18, 2014 at 8:06 am #421595
    SAMURI
    Participant

    Re: Diplomat oven not working

    If it is not the safety thermostat TOC or the main stat and a time is set on the timer then it is most likely a timer fault.

    The timers a not cheap.

    Bob

    November 18, 2014 at 10:07 am #421596
    Bas400
    Participant

    Re: Diplomat oven not working

    Hi Bob
    There is another stat like the one I tried on the back It is situated on the top just behind the clock also with two wires attached

    Would i be better to change the thermostat out first? Is there anyway i can test the timer or bypass it altogether

    Thanks
    Brian

    November 18, 2014 at 10:11 am #421597
    adv
    Participant

    Re: Diplomat oven not working

    that state could be for the cooling fan if it has one , only activates when oven gets hot

    November 18, 2014 at 11:12 am #421598
    Bas400
    Participant

    Re: Diplomat oven not working

    Yes it has a cooling fan at the back of the oven

    November 18, 2014 at 12:49 pm #421599
    Bas400
    Participant

    Re: Diplomat oven not working

    I will try joining the 2 wires to the main thermostat to bypass the main thermostat tonight.

    I have located the round button size stat and joined the wires together.Not sure what this means Bob for CONTINUITY at the same time

    November 18, 2014 at 2:25 pm #421600
    SAMURI
    Participant

    Re: Diplomat oven not working

    If you joined the wires on the button stat and it did not make any difference the stat may be ok.

    To test the stat you just need to check if you have a circuit through it the same as you can check a fuse.

    Bob

    November 18, 2014 at 7:18 pm #421601
    Bas400
    Participant

    Re: Diplomat oven not working

    Thanks for your help bob

    But no joy think I’m going to give up .


    Cheers
    Brian

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • You must be logged in to reply to this topic.