Smeg DF614 dishwasher fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg DF614 dishwasher fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 19, 2014 at 7:46 pm #83105
    whiskeyjack6058
    Participant

    After finding the dishwasher in a state of internal flood, I mopped it out and traced the leak back to loose sump screws. This sorted the leak out. Now the machine runs for about 10 mins, drains down and presents error code – LEDs 2 & 3 flashing (glass cycle & bio) while beeping 4 times. There are 5 LEDs in total and the end one stays perminantly illuminated. I believe this may be a drainage error code but can’t seem to find anything viable to identify it with. Dishwasher drains down perfect.
    Any ideas please?
    Thanks in advance.
    Rob.

    November 19, 2014 at 8:55 pm #421773
    electrofix
    Moderator

    Re: Smeg DF614 dishwasher fault

    correct no drain in time allowed

    the unit may drain down but it can still think it is not empty due to blockages

    find the pressure switch and disconnect the tube (thin black tube normally) and blow back down the tube into the dishwasher to see if it is clear

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.