Where is the thermal fuse on a Beko DVC665?

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Where is the thermal fuse on a Beko DVC665?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 28, 2014 at 9:53 am #83209
    StubbsUK
    Participant

    The bottom oven has stopped working on our cooker, no fan, no light, no heat, not even the indicator lamp on the front lights up. I had a read of some of the posts on this forum and it looks like the thermal cutout has gone, so I got a new one, but I’ve got the back off the oven and I can’t for the life of me see where it’s supposed to go?

    November 28, 2014 at 1:26 pm #422051
    lee8
    Participant

    Re: Where is the thermal fuse on a Beko DVC665?

    In the photo right hand side with red sleeve covering it and screwed to metal plate holding the fan as well.

    November 28, 2014 at 2:58 pm #422052
    StubbsUK
    Participant

    Re: Where is the thermal fuse on a Beko DVC665?

    Thanks Lee. Now I look at it, the plate the red thing is attached to is the same shape as the one in the packet & tracing the wires back into the machine they match the extra wires that come in the packet too.

    I’m just waiting for a pair of hands to hold the hob up & I can fit it, thanks again for your help.

    November 28, 2014 at 4:16 pm #422053
    StubbsUK
    Participant

    Re: Where is the thermal fuse on a Beko DVC665?

    Ok, that’s disappointing, the bottom oven still doesn’t work.

    So far it’s had a new element and now a new thermal fuse (I’ve metered the fuse I’ve just taken out and the fuse is still good), is there anything else it can be?

    November 28, 2014 at 4:26 pm #422054
    Andy jones
    Participant

    Re: Where is the thermal fuse on a Beko DVC665?

    You sure the timer isn’t on auto. Would need resetting if cooker has been off

    November 28, 2014 at 4:45 pm #422055
    StubbsUK
    Participant

    Re: Where is the thermal fuse on a Beko DVC665?

    That was it. Thank you Andy.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.