Creda synergie element required please

Home › Forums › Public Support Forums › Spare Parts Help › Creda synergie element required please

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 29, 2014 at 2:51 pm #83222
    IWANTBLUE
    Participant

    i NEED A MAIN Fan oven element for a creda synergie double oven main oven.

    it is 2500W with 35mm centre 1/4″ tabs existing is 255mm wide by 260mm talldouble wound.
    the tabs to lower edge is 215mm.
    no oven number to be seen but I have previously searched for XOU482SI


    any pointers gratefully received all the compatibles appear to be 37mm which is probably fine,and this one is probably not an original so that’s where the discrepancy has come about I guess
    cheers, Nick

    November 29, 2014 at 4:09 pm #422101
    don
    Moderator

    Re: Creda synergie element required please

    Hi

    I have always found http://www.elementman.co.uk/ to be the best when trying to find elements.

    Don

    November 29, 2014 at 6:05 pm #422102
    electrofix
    Moderator

    Re: Creda synergie element required please

    most common creda element is

    http://shop.ukwhitegoods.co.uk/catalogs … /?q=233920

    its quite different from most elements such as single screw fixing so if it looks right it should fit

    Dave

    November 30, 2014 at 11:09 am #422103
    IWANTBLUE
    Participant

    Re: Creda synergie element required please

    Thanks for your replies guys, I dont get my exact measurements anywhere, so I’ll take a punt… Thanks for both of your Links, much appreciated.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.