Miele

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 2, 2014 at 6:06 pm #83261
    Owain84
    Participant

    I have some brushes on a Miele to change tomorrow and haven’t changes some in a while. Am I right in thinking I have to reset the machine after changing as at the moment all it’s doing is flashing rinse. I have a feeling that even after I change brushes it will still flash until I reset machine.

    Let me know cheers

    December 2, 2014 at 6:20 pm #422272
    Martin
    Participant

    Re: Miele

    Will do when you get there and give us the model number. All the best, and, oh yes….cheers!

    December 2, 2014 at 8:02 pm #422273
    clayside
    Participant

    Re: Miele

    Don’t think you will need to do any reset
    clayside

    December 2, 2014 at 8:10 pm #422274
    Owain84
    Participant

    Re: Miele

    W522

    Cheers

    December 2, 2014 at 8:17 pm #422275
    clayside
    Participant

    Re: Miele

    No reset. Front off machine . Remove motor cover then brush module, fit brushes. reassemble and off you go.

    December 3, 2014 at 9:27 am #422276
    Owain84
    Participant

    Re: Miele

    Fitted brushes but still flashing. I’m sure I’ve used a reset on this before

    December 3, 2014 at 6:33 pm #422277
    eastlmark
    Moderator

    Re: Miele

    were the brushes worn? maybe its not the problem? Have you fitted the motor brush module correctly so the pins fit into their sockets?

    December 3, 2014 at 8:07 pm #422278
    Owain84
    Participant

    Re: Miele

    Yeah they were worn. Thought it was going to be a simple brush change like any other machine but rinse light still flashes. Going back tomorrow to try getting into service mode if not it’s likely to be motor/module I’m guessing

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.