ZANUSSI ZDC46130S error

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ZANUSSI ZDC46130S error

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 21, 2014 at 11:56 am #83483
    hilly
    Participant

    this dryer wont start any cycle, when I press the start/pause button it flashes red and beeps 3 times. im assuming that this is a error code but im not familiar with this model.
    any pointers pls

    cheers paul

    December 21, 2014 at 12:05 pm #422863
    bazza500
    Participant

    Re: ZANUSSI ZDC46130S error

    The button should flash red a certain number and then green for the second digit.

    Is this dryer in a cold room or garage? This may prevent it working.

    December 21, 2014 at 12:23 pm #422864
    hilly
    Participant

    Re: ZANUSSI ZDC46130S error

    it is in a garage, it just continuously flashes red and beeps 3 times repeatedly.

    December 21, 2014 at 7:20 pm #422865
    bazza500
    Participant

    Re: ZANUSSI ZDC46130S error

    It’s probably too cold and the sensor reading goes out of range and the board thinks it’s open cct. This is a common problem with sensor dryers kept in cold/damp places.

    Easy test is to take a hair dryer, give it a quick blast inside the drum and through the filter and see if it starts.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.