Hoover vhc691b

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hoover vhc691b

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 2, 2015 at 9:03 pm #83590
    cmw
    Participant

    Hi my tumble-dryer won’t heat up and all display lights are flashing… Have replaced heating element and thermostat but hasn’t fixed problem.. 🙁

    February 2, 2015 at 8:08 pm #423184
    D.JB
    Participant

    Re: Hoover vhc691b

    Hi there I have the same problem , checked the thermostats and element and all good , suspecting the relay on the main board

    February 8, 2015 at 7:43 pm #423185
    D.JB
    Participant

    Re: Hoover vhc691b

    Ok I have stripped down the machine, checked the heater and its stats all are good , checked the thermistors and the float switch , Fault found on the PCB mounted relay located beside where the 3 black and one red cables plug onto the control board , choice is 85 euro for a new board or 5 euro for a relay and 15 min with a soldering iron

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.