Whirlpool diplomat ADP8322 no error codes or beep

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool diplomat ADP8322 no error codes or beep

Viewing 15 posts - 1 through 15 (of 16 total)
1 2
  • Author
    Posts
  • January 10, 2015 at 9:31 pm #83699
    Mark9
    Participant

    Hi my whirlpool diplomat dishwasher was running great until the other day I came in from work and I could hear it beeping so I canceld the beeping and thought I’ll look at it later
    so I set it away on a rinse and it starts doing its thing but about 1 minute in there is is a noise like when it drops the tablet like a bang then the machine stops no flashing lights no beeps so I can’t get a error code to point me in right direction
    Iv have it on its side today and had a look but nothing looks damaged

    Any help would be very helpful thanks

    January 10, 2015 at 11:49 pm #423479
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    they have a habit of breaking wires at the bottom of the door. remove door cover and check wires as they bend to go underneath, be careful if there are breaks make sure you know which wire joints to what as a lot of them are black

    Dave

    January 11, 2015 at 12:07 am #423480
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Hi I had the door covers off today all wires looked intact no insulation damaged to the wires but the plastic trunking was damaged I will replace this once it back up and running

    Thanks

    January 11, 2015 at 12:21 am #423481
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    bit lost for ideas now. soap dispensor is not used on rinse so cant think what the noise can be

    to go through it
    set and start prog
    drain pump runs y?n
    drain pump stops and machine fills y/n
    main wash motor starts y/n

    Dave

    January 11, 2015 at 12:40 am #423482
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    When it stops I open the door any the bottom in full of water if I press start button and shut door it pumps water back out open the door again no water were filter is
    So not sure what pumps are or are not working strange how there’s no errors showing

    January 11, 2015 at 1:09 am #423483
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    first off the drain punp should start bit of a whiring sound

    than this stops and machine fills

    then the main motor kicks in you will hear a louder wooshing sound

    these main motors fail and when thay do they can go in one of 2 ways

    way 1 you get a throbbing sound
    way 2 complete silence

    you may have a main motor failure current part no 481010625629

    do a google image search of number. to be certain you have to check for power on the motor but no start


    Dave

    January 11, 2015 at 12:10 pm #423484
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Iv just taken the circulation pump out and stripped it down on th impeller part there is like a metal looking shaft part that looks like it’s cracked on both sides or I they meant to look like that I’ll leave it out for now

    January 11, 2015 at 2:34 pm #423485
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Not sure if this is ment to look like this

    January 11, 2015 at 6:58 pm #423486
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Any suggestions ?

    January 11, 2015 at 9:40 pm #423487
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    thats you problem its shot

    thats a magnet

    Dave

    January 11, 2015 at 9:50 pm #423488
    Mark9
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Yeah I’m glad if found something looks like I need to order a new motor thanks for you help

    January 11, 2015 at 9:55 pm #423489
    clivejameson
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Another Askoll pump, not a very successful experiment by Whirlpool! The part number Dave gave is a conversion to the older (much more reliable) pump…looks very different but will sort the problem…

    January 11, 2015 at 10:04 pm #423490
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    nope they stopped using the old good pump and found another cheaper one. works same as the askol

    Dave

    January 11, 2015 at 10:10 pm #423491
    clivejameson
    Participant

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    Yes, i meant the old ‘type’ pump…cap run motor through a seal…

    Hope it doesn’t work the same as the Askoll 😆

    January 11, 2015 at 10:21 pm #423492
    electrofix
    Moderator

    Re: Whirlpool diplomat ADP8322 no error codes or beep

    no luckily just a cheaper plastic version of old metal motor

    Dave

    added picture thanks to Qualtex

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 16 total)
1 2
  • You must be logged in to reply to this topic.