Hotpoint WD64 Mains Filter wiring

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WD64 Mains Filter wiring

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 11, 2015 at 12:51 am #83701
    cannopa
    Participant

    I have a Hotpoint WD64 and the Mains Filter has exploded. So violently that all the spade connectors came off their terminals. While I’m waiting for the part to arrive can anyone assist with how the four wires should be reconnected? They are coloured as follows…
    Blue
    Brown
    Blue/Green
    Brown/Green

    Many thanks

    January 11, 2015 at 9:18 am #423501
    iadom
    Moderator

    Re: Hotpoint WD64 Mains Filter wiring

    Look on the side of the mains filter, the connections are shown on there. 😉

    January 13, 2015 at 9:51 pm #423502
    cannopa
    Participant

    Re: Hotpoint WD64 Mains Filter wiring

    Many thanks iadom.
    I can see the diagram with 1&2 for the input and 3&4 for the output, as well as the L & N but I’m not sure if these are labelled up on the spade terminals as this end of the filter disintegrated in the explosion!
    I’ll check when the replacement arrives and hopefully all will be clear. 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.