Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

Home Forums Public Support Forums Spare Parts Help Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #83740
    osc
    Participant

    Hi my Bosch Exxcel WVT1260GB/01 is doing the stuck on 1 minute.

    I’ve checked the heater – resistance is OK at around 29 Ohms, and when I bench test the element gets hot. I’ve checked the drain pump – spins freely and works quietly during a bench test.

    The PCB has some soot on the component side but I can’t see which component has blown.

    Where can I get a PCB repair or replacement?

    #423615
    kwatt
    Keymaster

    Re: Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

    Well the PCB shows a list price of over £200 so, I’d be willing to bet that’s more than any sane person would spend on one. 😉

    K.

    #423616
    osc
    Participant

    Re: Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

    Thanks, it was a good machine but not that good! Might try and find a local repair company – any ideas on here? I wouldn’t normally bother, but the rest of the machine is very clean and it will save it from the landfill.

    #423617
    kwatt
    Keymaster

    Re: Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

    If there are any local to you, you should find them here:

    http://www.ukwhitegoods.co.uk/search/fi … ineer.html

    K.

    #423618
    osc
    Participant

    Re: Bosch Exxcel WVT1260GB/01 – PCB replacement or repair

    It was a dry joint on the board – ran a soldering iron across the major joints, reassembled and all is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}.

    Thanks to all that helped, especially appliancefix82 who mentioned this in a previous post with an explanation of what is going on with the long cycle time.

    washing-machine-forum/bosch-wvt1260-not-rinsing-draining-stuck-wash-mode-t83618.html

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.