beko dryer model drc68c tripping elec

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko dryer model drc68c tripping elec

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 28, 2015 at 9:33 pm #83906
    HotDog
    Participant

    Are these programmed to go wrong at 18months old seem to be getting more of them this one is picking up moisture onto the element and tripping electric i have checked for blockages, pump works ok cannot find a reason why, the heater sits just above the rear of the condensor so there is very little protection for the heater to get damp anyone help.

    January 29, 2015 at 7:38 pm #424161
    Seamy
    Participant

    Re: beko dryer model drc68c tripping elec

    If the condenser isn’t cleaned regularly excess moisture breaks down the heater, most times its the NTC leaking down to earth.

    January 29, 2015 at 9:50 pm #424162
    HotDog
    Participant

    Re: beko dryer model drc68c tripping elec

    Thanks i should have mentioned the customer has kept the condensor very clean it only trips after about 15 min then whe you remove back panel its full of moisture done loads of same problem on hotpoint which i have fixed no problem by cleaning and clearing pump/condensor,i know its a basic problem just cannot see why on this one

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.