LG Condensor Tumble Dryer RC9011A “clean filter” light on

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG Condensor Tumble Dryer RC9011A “clean filter” light on

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 23, 2015 at 6:43 pm #84185
    jontymox
    Participant

    Good evening all,

    Wondering if anyone can advise on a problem with the above tumble drier?

    The appliance works fine for about ten minutes, then the “clean filter” light illuminates, together with a buzzer, and sometimes aborts the programme.

    The filter is absolutely fine, as is the condenser and housing, which I have cleaned and dried.

    Wondering if there is a suspect sensor, or what the underlying cause may be?


    jonty

    March 3, 2015 at 5:46 pm #424976
    jontymox
    Participant

    Re: LG Condensor Tumble Dryer RC9011A "clean filter" light

    Does anyone have a manual, or is there a test procedure for this dryer?

    I’ve located a sensor behind the lint filter,(and wonder if this is some sort of turbidity sensor?) in the housing, but unable to find it on a parts diagram, and it may not be faulty anyway.

    Any help gratefully accepted!

    jonty

    March 10, 2015 at 8:19 pm #424977
    jontymox
    Participant

    Re: LG Condensor Tumble Dryer RC9011A "clean filter" light

    I’ve finally ascertained that the sensor in question is a TOC ‘stat.

    Does anyone know if this sensor would cause the above problem? I assume that it measures the air flow/density, and if faulty sends the clean filter light on.


    jonty

    March 26, 2015 at 5:19 pm #424978
    jontymox
    Participant

    Re: LG Condensor Tumble Dryer RC9011A "clean filter" light

    Good afternoon,

    Above TOC fine, and further tests revealed Error Code: TE3

    This relates to temp’ thermistor, and related wiring, which I’ve checked and found to be good.

    Therefore, suspect electronic control module.

    jonty

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.