- This topic has 1 reply, 2 voices, and was last updated 11 years, 1 month ago by
.
-
Posts
-
Can anyone tell me what the maximum distance an AEG F88060Vi0V should be from the waste trap.
The waste is currently 2.8 meters long and recently I have had problems with the machine getting error i20.
The service point engineer has been out 6 or 7 times and now reckons the hose is too long although it was fine for 8 months previously.
AEG sell a waste hose 2.23 for this machine long so could .5 of a mter make a difference?
The dishwasher failed again last night with i10 error and they want to charge for call out.
Thanks for any input.
Re: AEG F88060Vi0V
my first question would be which service engineer? ( who is service point ? ) and does he know there is a service bulletin connected with this problem (i20) on your model
i10 fault is a fill fault so may not be connected but if you check inside unit and see how much water is coming in during fill. if it is filling ok then going into fault a blocked pressure chamber or faulty pressure switch could answer both problems
Dave
- You must be logged in to reply to this topic.