Hotpoint Ultima WMA 60 no controls, lights or anything

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Ultima WMA 60 no controls, lights or anything

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 2, 2015 at 5:32 pm #84265
    markthebandit
    Participant

    Hi, Our Hotpoint Ultima WMA 60 has stopped working. Nothing is happening – like the fuse has blown but have checked power right into & out of the capacitor. Any suggestions warmly welcomed, thanks.

    March 2, 2015 at 5:55 pm #425222
    iadom
    Moderator

    Re: Hotpoint Ultima WMA 60 no controls, lights or anything

    markthebandit wrote: have checked power right into & out of the capacitor. .

    I’m guessing you mean the mains filter or suppressor. 😉

    If the display is totally dead it could just be poor connections between the facia/control pcb and the main power pcb.

    If all connections are sound then both pcb’s need to be visually examined for any obvious component failure.

    If there is nothing obvious it would point to main pcb failure but a fault such as you describe is very rare indeed. This machine is generally very reliable on the electronics side.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.