Indesit/Hotpoint Smartreaders and Cards

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit/Hotpoint Smartreaders and Cards

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 4, 2015 at 8:36 am #84282
    squadman
    Participant

    Out of interest has anyone ever had any success using a reader and data card to program one of these appliances. From our own perspective we never have and chatting to a few others it appears they have’nt either. Now the process is not rocket science by most of the time the likes of Connect and whoever never seem to have stocks of these cards anyway.

    My curious nature makes me think that as the manufacturer has provided a solution to enable others than themselves to accomplish this job by this method they have made the process available outside manufacturers service.

    So has anyone used this on a regular basis with ongoing results ?

    March 4, 2015 at 9:45 am #425274
    BobHope
    Participant

    Re: Indesit/Hotpoint Smartreaders and Cards

    as long as you get the correct smartcard for the appliance you should have a good success at programming the modules.

    bob.

    March 4, 2015 at 12:34 pm #425275
    squadman
    Participant

    Re: Indesit/Hotpoint Smartreaders and Cards

    We have always had the correct smart card and to date not one has worked.

    March 4, 2015 at 12:49 pm #425276
    Andy jones
    Participant

    Re: Indesit/Hotpoint Smartreaders and Cards

    Have never tried tbh. If it’s under 5 I just advise them to get hotpoint out. Or use Emw

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.