Neff S41M63N0GB/43 Error E01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff S41M63N0GB/43 Error E01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 11, 2015 at 7:04 pm #84373
    smeghead
    Participant

    Had this come back to me after going out last week.-no fault found
    Comes up E01 at end of cycle or start of prog.
    Now its not starting at all
    Have checked for leaks etc, any NEFF experts put me on the right track??
    Thanks
    Clive.

    March 11, 2015 at 10:55 pm #425508
    nomadPaul
    Participant

    Re: Neff S41M63N0GB/43 Error E01

    E:01 is normally the pump relay on the control module. It can be intermittent and a pain to diagnose. Had one today funnily enough and it needed a new module.

    March 12, 2015 at 2:09 pm #425509
    smeghead
    Participant

    Re: Neff S41M63N0GB/43 Error E01

    Ok thanks, These new Neffs are a real pain with intermittant leaks & now relays. Not gonna recommend Neff anymore.
    Connect say the module is not programmed, does that mean its a NEFF job ?
    Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.