AWO/D5526 Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AWO/D5526 Dead

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 27, 2015 at 10:51 am #84528
    oscar123
    Participant

    Just been to fit a new module to this machine.. Nothing in display and looks as though no power. Checked supply etc. and power to module, fit module supplied by connect and the same fault.. though new module does have a green sticker on? espares?

    My question is have I missed something on the machine or have I been sent a dodgy module?

    Oscar

    March 28, 2015 at 8:05 am #425916
    electrofix
    Moderator

    Re: AWO/D5526 Dead

    is the old module totally dead as well ?

    would not be the first time i got faulty module from connect. the one i had had been damaged by someone else and returned to connect who just put it back in stock

    Dave

    March 30, 2015 at 11:53 am #425917
    oscar123
    Participant

    Re: AWO/D5526 Dead

    Yes the fault was the machine dead.. power in to main module but nothing. Checked socket and neutral etc..

    New module same fault but it does have an old green sticker on.. thinking maybe espares?

    March 30, 2015 at 12:01 pm #425918
    Hollytree_Technical
    Participant

    Re: AWO/D5526 Dead

    This may help

    Jem

    March 30, 2015 at 12:08 pm #425919
    oscar123
    Participant

    Re: AWO/D5526 Dead

    Thanks for the link Jem

    It is a common fault on Whirlpool boards then? I have a few dryers with the same fault.. Thing is I have bought a new board from Connect and it is the same fault.. So not sure if I have missed something or Connect have sent me a dodgy board? it looks like it has been returned from some one else.. not the most difficult thing to swap the plastic container!

    March 30, 2015 at 12:16 pm #425920
    Hollytree_Technical
    Participant

    Re: AWO/D5526 Dead

    I have done quite a few, put an ohmmeter across the resistor, if it reads a fair bit higher than the 22 ohms then it has failed, if you examine the inductor carefully you may spot a small amount of yellow/white gunk coming out of the side (not easy to see).

    Jem

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.