WIS24140gb/14 800 spin and end

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WIS24140gb/14 800 spin and end

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 8, 2015 at 1:49 pm #84649
    Johnnyboy
    Participant

    Hi folks, this Bosch/siemens unit WIS24140 lights up with 800,spin and end light flashing before start is pressed. Every programme is the same, select programme and even with the door open these lights flash. I tried replacing the interlock but no joy. Any info on these fault codes would be welcomed.
    Cheers Johnnyboy

    April 8, 2015 at 10:19 pm #426367
    electrofix
    Moderator

    Re: WIS24140gb/14 800 spin and end

    have you tried a reset ?

    Dave

    April 8, 2015 at 11:16 pm #426368
    Johnnyboy
    Participant

    Re: WIS24140gb/14 800 spin and end

    Sorry Dave I was unaware of a reset on these bad boys. Never mind the list of fault codes.

    April 8, 2015 at 11:41 pm #426369
    electrofix
    Moderator

    Re: WIS24140gb/14 800 spin and end

    most bosch or siemans with a spin speed button use the same reset

    ie
    turn prog knob to 6 o clock
    press and hold spin speed button
    turn prog knob 1 click clockwise
    then release spin button

    turn off wait 5 secs then turn on

    does not always work first time

    Dave

    April 9, 2015 at 8:29 am #426370
    Martin
    Participant

    Re: WIS24140gb/14 800 spin and end

    Motor fault error

    April 9, 2015 at 1:31 pm #426371
    Johnnyboy
    Participant

    Re: WIS24140gb/14 800 spin and end

    Cheers guys

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.