- This topic has 4 replies, 2 voices, and was last updated 10 years, 12 months ago by
.
-
Posts
-
Before visiting I had been told that during the previous week it had:
On one occasion gushed water (from the door?)
Displayed flashing lights one and five on completion of cycle
Displayed flashing lights three and five on completion of cycleOn visiting I discovered a dirty door seal and use of a detergent that seemed to be over-sudding. Whilst I was there I observed it filling, detergent dispenser working, heating and draining and leaking a tiny bit.
Email from customer today – apparently it no longer leaks but lights three and five flash on completion of a cycle, and customer is resetting by switching off for a while (I will of course advise re the reset button). No mention of whether plates seem to be clean or not. I can confirm that this particular machine does have a row of five lights and it is the Chinese model.
Any ideas folks?
Re: Indesit DI450 UK.C flooding and error codes
And I can confirm that the error codes for this have been in the Known Error codes thread since June 2004. 😉
Re: Indesit DI450 UK.C flooding and error codes
Hi Iadom,
Thanks for that – I should better acquaint myself with this site. A question though: If the last four lights are the only ones to take notice of on a five light machine, what meaning (if any) does illumination of the first light (on its own or in combination) have?
Cheers, Derek
Re: Indesit DI450 UK.C flooding and error codes
It probably means its a pile of Indesit/Chinese junk. 🙁
As it was only the customer who ‘alledgedly’ saw light 1 on I would go with the error codes for lights 3 & 5.
- You must be logged in to reply to this topic.