Bra Wire trapped in Beko DCU 7230 W

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Bra Wire trapped in Beko DCU 7230 W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 14, 2015 at 7:55 am #84697
    argonath
    Participant

    Hi

    Fresh from fixing the washing machine after my lovely wife broke it, she has now tumble dried her bra with the result that the bra wire is now stuck at the back of dryer, and cannot be removed.

    Any tips on how to remove would be gratefully received..

    Brian 😳

    April 14, 2015 at 5:42 pm #426505
    Seamy
    Participant

    Re: Bra Wire trapped in Beko DCU 7230 W

    Remove plug from socket. Remove Bra wire from Dryer.

    Depends on how competent you are but there about 50 screws to remove, note the different lengths of screws when removing them and don’t put the wrong ones back in wrong place.
    Take off lid & back cover, take off belt off motor shaft, take off cable looms needed, take out drum identify where the said bra wire is, remove it & put the appliance back together in reverse order. Electrically test it & make sure its safe to use.

    Or maybe get an engineer to do it?

    May 7, 2015 at 9:55 pm #426506
    madrat
    Participant

    Re: Bra Wire trapped in Beko DCU 7230 W

    Or get a new wife it might be easier in the end 😆

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.