Tricity Bendix AW1000 Error Code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Tricity Bendix AW1000 Error Code

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 14, 2015 at 4:42 pm #84705
    Taff
    Participant

    This machine when switched on and a program selected, start button pressed, the door locks, then pumps out for a few seconds, then all light go out and then the end light flashes 3 time then a pause the flashes again 3 times. Any clues on this one. Motor brushes checked, element and thermistor good readings, water valves serviceable. I suspect the control module but can anyone confirm this please?

    April 14, 2015 at 5:32 pm #426521
    Seamy
    Participant

    Re: Tricity Bendix AW1000 Error Code

    Possibly heater failure, you need to check it with a megger for earth leakage.
    E33 = Pressure switch fault, current leakage from heating element to
    ground, PCB faulty, dust on tracks shorting is a classic cause of this.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.