- This topic has 1 reply, 2 voices, and was last updated 10 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
My machine won’t get past the end of the wash phase. It gives 03.
The machine DOES drain though. ALL pipes are clear and the pump works fine, I’ve fitted a new pressure switch with no improvement and tried a new Electronic module ( which displayed ’51 3′) I guess they have to be set up somehow.
Sometimes, if I turn everything off at ’03’ and then back on ..select rinse..it will finish the wash.
Any help would be appreciated.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.