Whirlpool ADP7409 851156115892 Fault F6

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADP7409 851156115892 Fault F6

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 6, 2015 at 6:55 pm #84877
    allan73
    Participant

    Evening all.
    The above dishwasher is filling and starting to wash, then aborts with F6 on display.
    I’ve changed the flow meter to no avail. Anything else I should be looking at ?

    Allan.

    May 7, 2015 at 7:20 am #427055
    electrofix
    Moderator

    Re: Whirlpool ADP7409 851156115892 Fault F6

    dont know where main prog is on this model but if its in the door have you checked for broken wires ?

    Dave

    May 7, 2015 at 9:29 am #427056
    allan73
    Participant

    Re: Whirlpool ADP7409 851156115892 Fault F6

    Nothing visable Dave. Protection sleave is intact, I’ll double check thin wires to flow meter with multimeter.

    Allan

    May 7, 2015 at 10:22 am #427057
    allan73
    Participant

    Re: Whirlpool ADP7409 851156115892 Fault F6

    Checked thin wires to flow meter reading okay. There’s a third wire from the flow meter output on pcb going to a sensor on sump, fed off circ pump. Can anyone tell me if this could be problem ?

    Allan

    June 23, 2015 at 3:51 pm #427058
    Micky 32
    Participant

    Re: Whirlpool ADP7409 851156115892 Fault F6

    Cut the wires back a bit and Try soldering the wires directly on the sensor and see if it improves.Worked a few times for me. Plug connector might not be great.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.