- This topic has 4 replies, 3 voices, and was last updated 10 years, 11 months ago by
.
-
Posts
-
Hello,
I have a Hoover condenser dryer showing empty water light constantly. Filters etc checked ok. Any ideas please? Could it be condensing unit, or a sensor. i appreciate your help guys.
Many thanks,
John.
Re: Hoover Vision HD condenser dryer showing tank full
first check on this would be the thermostats on the heater ( if unit is heating these will likely be ok )
if they are ok most condensor dryers have a float in the bottom that senses water level this could be stuck
Dave
Re: Hoover Vision HD condenser dryer showing tank full
I’d have thought the heater would cut out if the water full light was activated ?
Re: Hoover Vision HD condenser dryer showing tank full
very likely
my reason for saying the above is if the stats go open circuit it can bring the light on. it does on hotpoints and i think hovvers do too but not sure
Dave
Re: Hoover Vision HD condenser dryer showing tank full
Thanks for the replies. The customer says it sometimes dries, although I couldn’t get it to start, which would make me look at stats unless he is right about it sometimes working. Don’t think there is a float on this one – there is however two of these, http://shop.ukwhitegoods.co.uk/40003258 … yer-sensor
One below the fluff filter and one at the back about the water tank. Any ideas?
Thanks,John.
- You must be logged in to reply to this topic.