Hoover Ultima E01 Error code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Ultima E01 Error code

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 8, 2015 at 12:49 pm #84900
    neon_3SP_glow
    Participant

    Apologies if this is already listed within the error code section, I have looked and not found ‘Ultima’ machines listed, plenty of ‘Optima’ though!

    HOOVER
    WMH 148DF/L-80
    3100457312250606

    Error F01

    – Machine (on wash cycle) fills to correct level
    – Starts rotation of drum
    – Displays error E01 roughly 10/15 seconds after start
    – Same fault appears upon selecting spin programme

    – Have checked valves, heater, thermistor, motor (brush type)with no fault present. Emptying function works fine.

    Any ideas on what the code is indicating(?) would be greatly appreciated

    Many thanks…

    May 9, 2015 at 11:22 pm #427112
    simon26r
    Participant

    Re: Hoover Ultima E01 Error code

    Don’t hold me to this but im guessing the element is up the duff. Have you tested with a megger.

    May 12, 2015 at 6:23 pm #427113
    neon_3SP_glow
    Participant

    Re: Hoover Ultima E01 Error code

    simon26r wrote:Don’t hold me to this but im guessing the element is up the duff. Have you tested with a megger.

    Have physically hooked a new element to it with no change.

    Thanks for the reply though. Could be wiring etc.

    Please, is there a list in which the error codes are listed?..

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.