- This topic has 4 replies, 3 voices, and was last updated 10 years, 11 months ago by
.
-
Posts
-
(33/65213082)
Hi Connect tell me whole motor assembly is required at cost of £300+, not particularly trusting of them, and wonder if any miele guys here can tell me if the heater assembly/impellor housing is used on any other models, where it would be listed as available separately from the circulation motor?
Cheers
Rich
Re: miele G1270SCvi d/w circulatiion impellor seal
just ring miele. they are quite good will happily give you part numbers etc and email breakdowns if you ask
they will know if the unit strips down or not. also most miele parts have the part number on them
Dave
Re: miele G1270SCvi d/w circulatiion impellor seal
did that girl on the phone couldnt find the part i was looking for so was going to get the retired engineer there to call me with tech advice
Re: miele G1270SCvi d/w circulatiion impellor seal
Pump facia plate with heater and seal part no 61957881
Pump casing with impeller and shaft seal etc part no 6195751
Clayside
- You must be logged in to reply to this topic.