Bosch dish heater Do they match

Re: Bosch dish heater Do they match

actual heater element failures are pretty rare on those, most of the time when we replace teh element its due to the diverter motor or seals leaking. almost all heater issues are pcb faults – failed relays, blown triacs or dry joints. I think weve replaced 3 bsh elements for o/c over the last 10 years and theres a hell of a lot of them round here!

difference between both units is one youd need has the turbidity sensor, and one you have doesnt have it, you can unclip the element from the housing and just swap that out if it has gone o/c its a bit fiddly but if it gets the job done…

PS take some solder and a soldering iron with you 😉

Re: Bosch dish heater Do they match

gandh1 wrote:actual heater element failures are pretty rare on those, most of the time when we replace teh element its due to the diverter motor or seals leaking. almost all heater issues are pcb faults – failed relays, blown triacs or dry joints. I think weve replaced 3 bsh elements for o/c over the last 10 years and theres a hell of a lot of them round here!

difference between both units is one youd need has the turbidity sensor, and one you have doesnt have it, you can unclip the element from the housing and just swap that out if it has gone o/c its a bit fiddly but if it gets the job done…

PS take some solder and a soldering iron with you 😉

You must live in a different world to me, have had loads of OC and SC heaters gone over the years, can change them with eyes closed.
At one point I ordered 2 of each one I changed so as to have one in stock for the next time but never seem to need the same one twice, therefore have one or two on the shelves that never seem to fit any models I come across despite appearing identical.