F&P Washer Model#GWL-701-U – need advice .

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › F&P Washer Model#GWL-701-U – need advice .

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 16, 2005 at 12:42 pm #8506
    jophil28
    Participant

    Hi group members, I have a TV repair business and 30 years electronic experience. I have decided to boost my falling income with washing machine electronics repair. Maybe a mistake,. but here goes –
    This Fisher/Paykel 701`briefly squirts a spoonful of water ( the inlet valves open only for a fraction of a second). The washer will pump water in the spin mode but will not turn the bowl. I can hear a repetitive tiny groan of a noise after the water is pumped.
    In diagnostic mode the following LEDs are lit —
    Time saver
    Warm
    Short wash
    Slow

    Anyone ??
    I have no diagnostic info . Could someone please email me some codes and how to interpret them.. Thanks to all replies….John. 🙁

    March 16, 2005 at 7:35 pm #128974
    Penguin45
    Participant

    Re: F&P Washer Model#GWL-701-U – need advice .

    John,
    Is the spin light on as well?

    Penguin45.

    March 16, 2005 at 11:12 pm #128975
    jophil28
    Participant

    Re: F&P Washer Model#GWL-701-U – need advice .

    Hi Penguin, I am confused about the so-called “DIAGNOSTIC” mode . The advice from this and other forums is obscure and incomplete at best.
    If I press and hold Water Temp Down and then press PWR then two LEDS`are lit along the top row of eight’wash cycle’ LEDS. These are -the third from the left and the spin LED. Also the LOW Water Level light is lit.
    Then there is a post on the forum someplace which indicates that the Diagnostic Mode is entered by pressing The Start button together with the PWR button…..????
    THe MOdel # is GWL701-U
    Enlighten me please! John.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The topic ‘F&P Washer Model#GWL-701-U – need advice .’ is closed to new replies.