Admiral GC2027HNKBS front panel

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Admiral GC2027HNKBS front panel

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 4, 2015 at 8:24 am #85151
    Ray9500
    Participant

    Good morning all,
    Does anyone know how to access the front module on these? its behind the stainless door trim!
    Does it drop out from the front of the ice maker?
    Thee service number is 859510115000. I’ve got the service manual but there’s no clues there 😕

    Regards
    Ray

    June 4, 2015 at 8:56 am #427873
    EFS
    Participant

    Re: Admiral GC2027HNKBS front panel

    On some of these you have to remove the stainless cladding which pulls off after the door handle has been removed.
    Awkward but not difficult.


    Steve.

    June 4, 2015 at 12:22 pm #427874
    Ray9500
    Participant

    Re: Admiral GC2027HNKBS front panel

    Many thanks Steve, wasn’t sure whether to attempt that but will now 😀

    Ray

    June 24, 2015 at 6:44 pm #427875
    Ray9500
    Participant

    Re: Admiral GC2027HNKBS front panel

    Quick update, spot on Steve!
    Removed the freezer door handle, took off door hinge undone two screws under the handle and lifted off door skin to access display module. Took around 30 minutes and the new module cured the problem 😀
    Thanks again!

    June 25, 2015 at 9:31 pm #427876
    EFS
    Participant

    Re: Admiral GC2027HNKBS front panel

    :tup:

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.