Baumatic BDW13 dishwasher lower door seal.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic BDW13 dishwasher lower door seal.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 17, 2015 at 8:46 pm #85289
    aqualectric
    Participant

    Baumatic BDW13 dishwasher.

    Now this a very stupid problem – but a problem nonetheless. :rolls:

    Fitting a new lower door seal…….. I can fit it – but it comes off easily. The lip it is supposed to push over is 3mm wide and although I have fitted it; tried to crimp it and even glued it on – the damn thing still comes off. It did last a year from the last time – superglued the sod on as I was reaching for the axe with the other hand!
    But it’s come off again – what am I doing wrong? Not scrapping it, you say? Maybe – but any pointers would be appreciated!!

    Cheers,

    Steve.

    June 20, 2015 at 10:12 am #428273
    nigegt
    Participant

    Re: Baumatic BDW13 dishwasher lower door seal.

    I have had the same issue on occasion and ended up replacing the inner door panel with the seal already factory fitted. It was either that or suicide!

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.