JLWD1609 PNC 914604321/00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › JLWD1609 PNC 914604321/00

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 24, 2015 at 5:37 pm #85350
    BURNIE
    Participant

    Problem with dryer. Set for 30 mins dry and after drying for about 10 mins neutral curcuit disengaged and timer desends to 0 in a matter of a few minutes. No earth leakage on element and all thermostats and thermistors check out ok. Have tried dryer module but still the same. Blower motor fine and condenser cleaned. Would be grateful for any help with this one please.

    June 25, 2015 at 10:50 am #428429
    johnnyj
    Participant

    Re: JLWD1609 PNC 914604321/00

    Think I had one doing something similar a while back I tried dryer module turned out was a duff valve

    July 6, 2015 at 7:27 am #428430
    BURNIE
    Participant

    Re: JLWD1609 PNC 914604321/00

    many thanks for that i will re-visit and check. i will let you know the out come.
    thanks again

    July 15, 2015 at 6:45 pm #428431
    BURNIE
    Participant

    Re: JLWD1609 PNC 914604321/00

    re-visited today with new valve. fitted and tested all was fine. i am very grateful johnnyj for your advice and assistance with this one. you were spot on.
    many thanks once again

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.