zanussi zwg1140m shutting down

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwg1140m shutting down

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 11, 2015 at 3:04 pm #85505
    hilly
    Participant

    hi this zanussi zwg1140m 914579820/00 w/m goes ok for about 15 mins then shuts down, there was a earth fault on the heater so I replaced that but its still doing the same, theres still power going into the pcb and after a couple of mins it will turn back on again.
    has anyone else come across this?
    cheers paul

    July 15, 2015 at 9:17 am #428750
    Seamy
    Participant

    Re: zanussi zwg1140m shutting down

    P.C.B perhaps, they’re prone to quite strange faults, you can stick a 1120 board in to test if you have one, but obviously spin speed will be diff’. Check motor for earth faults or loom faults also.

    July 15, 2015 at 5:25 pm #428751
    Hollytree_Technical
    Participant

    Re: zanussi zwg1140m shutting down

    If it is turning right off then I would suggest that the power supply chip may be failing or that there is a dry joint on the PCB.

    August 4, 2015 at 8:15 am #428752
    hilly
    Participant

    Re: zanussi zwg1140m shutting down

    thanks for the replies, quick update, no earth faults or dry joints so I quoted for a replacement pcb, and now the machine has gone to appliance heaven, r,i,p you Chinese piece of junk

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.