Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 6, 2015 at 11:54 am #85755
    grooster
    Participant

    Hi,

    I’ve just been out to a Zanussi dishwasher that had water in the base. I emptied the water out and tried it again but it just seems to overfill. It doesn’t have a pressure switch or a reed switch that I can see but obviously it must have one somewhere.
    Ive not worked on this new type before and it is only 11 months old but the customer is an old customer who wants me to do the job.
    If anybody can point me in the right direction it would be appreciated.

    Cheers

    August 6, 2015 at 6:18 pm #429479
    bazza500
    Participant

    Re: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

    It needs the pressure sensor modification done.

    August 6, 2015 at 6:30 pm #429480
    grooster
    Participant

    Re: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

    Is this a well known fault? I haven’t heard of a modification on this machine. Do you have the part numbers to hand.
    Cheers
    Nick

    August 6, 2015 at 7:06 pm #429481
    bazza500
    Participant

    Re: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

    140000554067

    August 6, 2015 at 7:21 pm #429482
    grooster
    Participant

    Re: Zanussi D/w ZDT12011FA – 911 539 107 – overfilling

    Cheers bazza

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.