Siemens Vented dryer IQ300 stops after 3mins filter light.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens Vented dryer IQ300 stops after 3mins filter light.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 25, 2015 at 1:47 pm #85921
    RHrepairs
    Participant

    Have a Siemens dryer WT36V395GB/16 FD9211 here and the machine stops after 3mins and the filter/hose light comes on. Put my ampmeter on to it and its pulling just over 3amps when on. So anyone got any idea? Or does anyone have the diagnostic test for this appliance so i can pull up a fault code.
    Thanks

    August 25, 2015 at 1:50 pm #429827
    Martin
    Participant

    Re: Siemens Vented dryer IQ300 stops after 3mins filter ligh

    Front NTC

    August 25, 2015 at 2:08 pm #429828
    RHrepairs
    Participant

    Re: Siemens Vented dryer IQ300 stops after 3mins filter ligh

    Thanks Martin

    August 26, 2015 at 8:55 am #429829
    RHrepairs
    Participant

    Re: Siemens Vented dryer IQ300 stops after 3mins filter ligh

    There is no front ntc is this appliance…so could it be the heater or board?

    August 26, 2015 at 9:43 am #429830
    Martin
    Participant

    Re: Siemens Vented dryer IQ300 stops after 3mins filter ligh

    The fault indicative of an NTC fault or an airflow restriction somewhere (fluff block in heater box or exhaust through the wall) causing the NTC to close the programme down.

    I think it neither a fault with the heater or the board at this stage TBH.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.