Whirlpool Top Loading Washer (3RLSQ8033SW0)

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Whirlpool Top Loading Washer (3RLSQ8033SW0)

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #85932
    aqua_serve
    Participant

    Guys,

    I’m not too hot with top loading washers so am hoping some of you might be able to assist.

    I’ve been to see this Whirlpool 3RLSQ8033SW0 a couple of times over the last few years, I’ve fitted a new clutch assembly and motor in the past. I got a call to it yesterday, the machine appears dead, full of water having stopped mid cycle. I’ve been over it with my meter but can’t find any issue so suspect it’ll be the control board (there are no visible signs of damage though). If anyone with more experience of this type of machine could pass comment I’d appreciate it.

    Yours,

    Mark

    #429848
    bazza500
    Participant

    Re: Whirlpool Top Loading Washer (3RLSQ8033SW0)

    If my memory serves me right there is an internal in line fuse in these. It is just in the wiring loom under the control panel in one of those twist to open holders.

    #429849
    Alanj
    Participant

    Re: Whirlpool Top Loading Washer (3RLSQ8033SW0)

    Hi Aqua serve, fuse is T20 6.3 amp, 5045170872984 at connect £7.03 + vat.
    I’m sure I have bought them cheaper from RS Components. 10 for £2.00.

    Alan

    #429850
    EFS
    Participant

    Re: Whirlpool Top Loading Washer (3RLSQ8033SW0)

    Maplins have them if you have a store nearby.
    Cheap as chips.

    Steve

    #429851
    aqua_serve
    Participant

    Re: Whirlpool Top Loading Washer (3RLSQ8033SW0)

    Thanks guys,

    I’m not sure how I missed that as I had the control panel off and didn’t see it. I’ll head back and check.

    Many thanks for all your help.

    Mark

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.