- This topic has 2 replies, 3 voices, and was last updated 10 years, 6 months ago by
.
-
Posts
-
Hi
I have a beko 4311 and its never been brilliant at washing especially the top basket. Recently it has become unacceptable leaving gritty residue over anything in the top. I have cleaned out all the pipework and made sure all the small pipes are free. The arms and feed pipes are fine. After a wash the inside of the machine is spotless the bottom basket OK but the top like its been on a beach picnic, the water in the sump is not that dirty. If you run the machine again straight away it is no better so i can only put it down to two things either it is not filling enough so starves water to the top or the pump is not up to the job. Can anyone tell me how much water it should fill on the initial fill so I can check its ok also am I missing anything? Many thanks mikep12Re: Beko 4311
Spray arms blocked maybe ?
Top spray arm feed pipe has been problematic on them, guides at back that the basket push into tend to get damaged so not letting top basket seat correctly, so poor washing on the top. Look for feed pipe out at base or blocked from sump area either.
All Beko dishwashers fill 4 litres of water.Re: Beko 4311
Hi could somebody help me, Beko Dishwasher again, only two years old, salt, rinse aid all used correctly. Pipes are all clear, filter clear and used cleaner through it three times and the inside is looking clean yet when using it comes out with a silky skum film …………….any ideas please? ❓
- You must be logged in to reply to this topic.