- This topic has 2 replies, 2 voices, and was last updated 10 years, 5 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Went to this washer today. Replaced drain pump as old one had lost impellor. Put on test and fills and drains but no drum rotation. Check carbons and they were badly worn(one not making contact at all) Ran test again and still no rotation. Relay makes usual click after which you would expect motor to turn but no nothing. Checked new carbons(car93’s) weren’t stuck. Am without my megger at moment but continuity on pins 1+2, 3+4, and 5+6. am I right in thinking pins 3+4 are motor toc.
Re: Bosch wae2416gb/03
Can’t help you with which is the TOC pins but you’ve got continuity on all 6 so that seems OK to my way of thinking. But what about the motor plug? Are the wires between the module plug and motor OK or has one wire got broken?
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.