- This topic has 2 replies, 2 voices, and was last updated 10 years, 5 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Re: Whirlpool AWOE 9140
the code you mentioned is indication of a water level problem
Remove the air hose from the water level switch, and blow into the hose,as hard as possible, to clear any debris that may have accumulated in the hose.Remove the lower panel, and remove the filter from the drain pump and check and clear any debris from the filter and the interior of the pump, and hoses.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.